Master Key Systems
One key for the whole building, a different key per door and a grand master for the owner or manager. We plan the keying, cut the keys on site and hand them over with what opens what written down.
Keying, cylinders and door hardware for business premises. We come to the property and work around your opening hours anywhere in Richmond, Henrico, Chesterfield and Powhatan.
Call +1 (804) 502-4314Open 24 hours a day, 7 days a week
Locks, cylinders and hardware for shops, offices, warehouses and rental property across Greater Richmond.
One key for the whole building, a different key per door and a grand master for the owner or manager. We plan the keying, cut the keys on site and hand them over with what opens what written down.
When someone with a key moves on, a rekey makes every old key dead — the quick, low-cost way to put the property back in control of its doors.
Standard cylinders and small-format interchangeable cores come out and new, keyed ones go in, usually on the same visit.
Crash bars, exit devices, rods and gaskets fitted, adjusted and tested so the door opens cleanly and latches shut.
Auto-slam locks, cylinder pulls and double-cylinder deadbolts on glass and metal storefront doors, adjusted so the door sits square in the frame.
Spare keys issued against a list, so the number of keys loose in a building is known before the next rekey comes up.
A business lock is a different job from a house lock. More people carry keys, the hardware is opened hundreds of times a day, and a cylinder that fails on a shop door in the middle of the afternoon cannot wait until it is convenient.
Lock & Key Hub is a mobile commercial locksmith. We bring keying, cylinder service and hardware work to the property — a retail unit in Short Pump, an office suite in Glen Allen, a warehouse off Chamberlayne, a four-unit rental in Fulton.
A master key system is a keying plan before it is a pile of keys: which door each person opens, which doors a manager opens, and how many spare keys are loose. Tell us the layout and we will talk through the plan with you, cut the keys on site and hand them over with a written note of what was issued.
When staff change or a key goes missing, rekeying the cylinders makes the old keys dead without replacing hardware that is still good. On small-format interchangeable cores we change the core rather than the whole lock, which keeps the work down to a short visit.
We fit and adjust the hardware commercial doors depend on: cylindrical and mortise lock bodies, storefront auto-slam locks, door closers and brackets, panic bars and exit devices, and the cylinders that wear out inside them.
We also work with landlords and property managers — rekeying a unit between tenants, fitting a deadbolt where a rental has none, and locking a door that no longer lines up with its strike.
Someone on site needs to confirm the property is ours to work on — usually the owner, a manager or the tenant of record. Have the address, the door type and the lock you can see ready when you call, and we will tell you what to expect on the phone first.
We dispatch mobile locksmiths across the Richmond region. Call from anywhere on this list.
Not on the list? Call +1 (804) 502-4314 and we will tell you straight away whether we can reach you.
The short answers. Call +1 (804) 502-4314 if yours is not here.
Most of them — wood, steel, hollow metal, glass and metal storefront. Describe the door and the lock when you call and we will say before we travel if it is our work.
Yes. That is a keying plan: tenant keys per building, a manager key across the properties you name, and an area master where it makes sense.
Rekey the cylinders that key opens. It is usually less work than replacing the locks and it is finished in one visit.
No contracts and no minimum call. Call when you need work done, and tell us what we did last time so the next visit starts from what is already there.
Yes, once the person on site can confirm they have a right to be there. Have the manager's number ready.
In most cases. We start with the least invasive method and tell you before we begin if the cylinder will have to be replaced.
If you are locked out right now, call +1 (804) 502-4314 — that is always faster. Use this form for scheduled work and we will call you back.